One of the most common ways to categorize cigars is by their shape and size. Although this sounds simple, it can be very confusing. For many years, the cigar industry has been using terms such as Corona and Panatela that correspond to the approximate length and width of the cigar, not the manufacturer or brand. Although most manufacturers use commonly accepted size names to describe their cigars, the actual size of a cigar with a particular name can vary among manufacturers.
In addition, cigars are now available in many more dimensions than were available in the past, and many manufacturers have created their own names for certain sizes. It is not too uncommon to find two cigars of the same size made by two different companies, sporting different names to describe the size.
Are Numbers Better Than Names?
To avoid confusion, it is easier to refer to a cigar’s length and width when describing its size. The length is measured in inches, while the width is measured by ring gauge—the diameter expressed in 64ths of an inch.
Despite all the inconsistencies with cigar names, it is still more interesting (and colorful) to describe the different sizes and shapes of cigars with names rather than with numbers. This is all part of the cigar mystique.
Names for Cigar Shapes
You may never have to use the terms that refer to the shape of a cigar since most of the common names for cigars are usually associated with their size. But if you want to truly be part of the cigar culture, it’s interesting to understand what these terms refer to:
Parejo: A parejo cigar is any cigar that has perfectly straight sides with a cylindrical shape, topped by a rounded head.
Figurado: A cigar with an irregular shape (e.g. having a cone-shaped head) is called a figurado.
Belicoso: This is a figurado-shaped cigar that tapers sharply at the head. The ter refers to any cigar that tapers at the head.
Torpedo: This is a cigar with a tapered head that comes to a very sharp point. Some manufacturers use other names for this shape.
Pyramid: Similar to Torpedo, but this cigar tapers all along its length, not just near the end.
Culebra: This unusual cigar features three individual cigars size braided together in a pretzel shape. Culebra means “snake” in Spanish. You are of course expected to separate the cigars before smoking them.
Perfecto: A cigar that is tapered on both ends.
Salomón: A Salomón is a very large Perfecto-shaped cigar with a tapered end that is usually cut flush. Longer versions with a closed foot are often known as a Diadema.
Diadema: This is a perfecto-shaped cigar similar to a Salomón, but slightly longer and thinner
Common Names for Cigar Sizes
There are many names for the various sizes (and shapes) of cigars, but here are just a few of the more common terms that you may encounter, and the approximate range of their dimensions. The ranges listed can be even wider, despite any overlapping.
Name Length (in.) Ring Gauge
Corona 5.5 to 6" 42 to 45
Panatela 5.5 to 6.5 34 to 38
Lonsdale 6 to 6.5 42 to 44
Lancero 7 to 7.5 38 to 40
Churchill 6.5 to 7 46 to 48
Robusto 4.5 to 5 48 to 50
Toro 6 to 6.5 48 to 50
Presidente 7 to 8.5 52 to 60
Gigante
6 60
Torpedo(Cone Shaped Head) 5 ½ to 6 ½ 46 to 52
How Is RC Engine Size Measured?
The 14 Types of Female Models
What Are Glulam Timbers and How They Are Used?
The Different Kinds of Male Models
Glossary of Modeling Terms and Phrases
Air Force Enlisted Rank (Insignia) History
Learn About Tour Merchandise Deals
The 12 Best Men’s Dress Shirts of 2022
Barcode Scanner Buying Guide for Retailers
Comparing Different Types and Sizes of Pianos
What Is the Difference Between Laptop and Notebook Computers?
How eBay Sellers Can Prevent Returns
The 9 Best Men’s Dress Pants of 2021
18 Tools Every Concrete Contractor Must Have
What is a Regulation-Sized Pool Table?
What to Consider When Buying Bike Tires
Home
Entertainment
Careers
Activities
Humor
About Us Advertise Careers Privacy Policy Editorial Guidelines Contact Terms of Use EU Privacy
LiveAbout is part of the Dotdash Meredith publishing family.
When you visit the site, Dotdash Meredith and its partners may store or retrieve information on your browser, mostly in the form of cookies. Cookies collect information about your preferences and your devices and are used to make the site work as you expect it to, to understand how you interact with the site, and to show advertisements that are targeted to your interests. You can find out more about our use, change your default settings, and withdraw your consent at any time with effect for the future by visiting Cookies Settings, which can also be found in the footer of the site. Cookies Settings Reject All Accept Cookies
One of the most common ways to categorize cigars is by their shape and size. Although this sounds simple, it can be very confusing. For many years, the cigar industry has been using terms such as Corona and Panatela that correspond to the approximate length and width of the cigar, not the manufacturer or brand. Although most manufacturers use commonly accepted size names to describe their cigars, the actual size of a cigar with a particular name can vary among manufacturers.
In addition, cigars are now available in many more dimensions than were available in the past, and many manufacturers have created their own names for certain sizes. It is not too uncommon to find two cigars of the same size made by two different companies, sporting different names to describe the size.
Are Numbers Better Than Names?
To avoid confusion, it is easier to refer to a cigar’s length and width when describing its size. The length is measured in inches, while the width is measured by ring gauge—the diameter expressed in 64ths of an inch.
Despite all the inconsistencies with cigar names, it is still more interesting (and colorful) to describe the different sizes and shapes of cigars with names rather than with numbers. This is all part of the cigar mystique.
Names for Cigar Shapes
You may never have to use the terms that refer to the shape of a cigar since most of the common names for cigars are usually associated with their size. But if you want to truly be part of the cigar culture, it’s interesting to understand what these terms refer to:
Parejo: A parejo cigar is any cigar that has perfectly straight sides with a cylindrical shape, topped by a rounded head.
Figurado: A cigar with an irregular shape (e.g. having a cone-shaped head) is called a figurado.
Belicoso: This is a figurado-shaped cigar that tapers sharply at the head. The ter refers to any cigar that tapers at the head.
Torpedo: This is a cigar with a tapered head that comes to a very sharp point. Some manufacturers use other names for this shape.
Pyramid: Similar to Torpedo, but this cigar tapers all along its length, not just near the end.
Culebra: This unusual cigar features three individual cigars size braided together in a pretzel shape. Culebra means “snake” in Spanish. You are of course expected to separate the cigars before smoking them.
Perfecto: A cigar that is tapered on both ends.
Salomón: A Salomón is a very large Perfecto-shaped cigar with a tapered end that is usually cut flush. Longer versions with a closed foot are often known as a Diadema.
Diadema: This is a perfecto-shaped cigar similar to a Salomón, but slightly longer and thinner
Common Names for Cigar Sizes
There are many names for the various sizes (and shapes) of cigars, but here are just a few of the more common terms that you may encounter, and the approximate range of their dimensions. The ranges listed can be even wider, despite any overlapping.
Name Length (in.) Ring Gauge
Corona 5.5 to 6" 42 to 45
Panatela 5.5 to 6.5 34 to 38
Lonsdale 6 to 6.5 42 to 44
Lancero 7 to 7.5 38 to 40
Churchill 6.5 to 7 46 to 48
Robusto 4.5 to 5 48 to 50
Toro 6 to 6.5 48 to 50
Presidente 7 to 8.5 52 to 60
Gigante
6 60
Torpedo(Cone Shaped Head) 5 ½ to 6 ½ 46 to 52
How Is RC Engine Size Measured?
The 14 Types of Female Models
What Are Glulam Timbers and How They Are Used?
The Different Kinds of Male Models
Glossary of Modeling Terms and Phrases
Air Force Enlisted Rank (Insignia) History
Learn About Tour Merchandise Deals
The 12 Best Men’s Dress Shirts of 2022
Barcode Scanner Buying Guide for Retailers
Comparing Different Types and Sizes of Pianos
What Is the Difference Between Laptop and Notebook Computers?
How eBay Sellers Can Prevent Returns
The 9 Best Men’s Dress Pants of 2021
18 Tools Every Concrete Contractor Must Have
What is a Regulation-Sized Pool Table?
What to Consider When Buying Bike Tires
When you visit the site, Dotdash Meredith and its partners may store or retrieve information on your browser, mostly in the form of cookies. Cookies collect information about your preferences and your devices and are used to make the site work as you expect it to, to understand how you interact with the site, and to show advertisements that are targeted to your interests. You can find out more about our use, change your default settings, and withdraw your consent at any time with effect for the future by visiting Cookies Settings, which can also be found in the footer of the site. Cookies Settings Reject All Accept Cookies
One of the most common ways to categorize cigars is by their shape and size. Although this sounds simple, it can be very confusing. For many years, the cigar industry has been using terms such as Corona and Panatela that correspond to the approximate length and width of the cigar, not the manufacturer or brand. Although most manufacturers use commonly accepted size names to describe their cigars, the actual size of a cigar with a particular name can vary among manufacturers.
In addition, cigars are now available in many more dimensions than were available in the past, and many manufacturers have created their own names for certain sizes. It is not too uncommon to find two cigars of the same size made by two different companies, sporting different names to describe the size.
Are Numbers Better Than Names?
To avoid confusion, it is easier to refer to a cigar’s length and width when describing its size. The length is measured in inches, while the width is measured by ring gauge—the diameter expressed in 64ths of an inch.
Despite all the inconsistencies with cigar names, it is still more interesting (and colorful) to describe the different sizes and shapes of cigars with names rather than with numbers. This is all part of the cigar mystique.
Names for Cigar Shapes
You may never have to use the terms that refer to the shape of a cigar since most of the common names for cigars are usually associated with their size. But if you want to truly be part of the cigar culture, it’s interesting to understand what these terms refer to:
Parejo: A parejo cigar is any cigar that has perfectly straight sides with a cylindrical shape, topped by a rounded head.
Figurado: A cigar with an irregular shape (e.g. having a cone-shaped head) is called a figurado.
Belicoso: This is a figurado-shaped cigar that tapers sharply at the head. The ter refers to any cigar that tapers at the head.
Torpedo: This is a cigar with a tapered head that comes to a very sharp point. Some manufacturers use other names for this shape.
Pyramid: Similar to Torpedo, but this cigar tapers all along its length, not just near the end.
Culebra: This unusual cigar features three individual cigars size braided together in a pretzel shape. Culebra means “snake” in Spanish. You are of course expected to separate the cigars before smoking them.
Perfecto: A cigar that is tapered on both ends.
Salomón: A Salomón is a very large Perfecto-shaped cigar with a tapered end that is usually cut flush. Longer versions with a closed foot are often known as a Diadema.
Diadema: This is a perfecto-shaped cigar similar to a Salomón, but slightly longer and thinner
Common Names for Cigar Sizes
There are many names for the various sizes (and shapes) of cigars, but here are just a few of the more common terms that you may encounter, and the approximate range of their dimensions. The ranges listed can be even wider, despite any overlapping.
Name Length (in.) Ring Gauge
Corona 5.5 to 6" 42 to 45
Panatela 5.5 to 6.5 34 to 38
Lonsdale 6 to 6.5 42 to 44
Lancero 7 to 7.5 38 to 40
Churchill 6.5 to 7 46 to 48
Robusto 4.5 to 5 48 to 50
Toro 6 to 6.5 48 to 50
Presidente 7 to 8.5 52 to 60
Gigante
6 60
Torpedo(Cone Shaped Head) 5 ½ to 6 ½ 46 to 52
One of the most common ways to categorize cigars is by their shape and size. Although this sounds simple, it can be very confusing. For many years, the cigar industry has been using terms such as Corona and Panatela that correspond to the approximate length and width of the cigar, not the manufacturer or brand. Although most manufacturers use commonly accepted size names to describe their cigars, the actual size of a cigar with a particular name can vary among manufacturers.
In addition, cigars are now available in many more dimensions than were available in the past, and many manufacturers have created their own names for certain sizes. It is not too uncommon to find two cigars of the same size made by two different companies, sporting different names to describe the size.
Are Numbers Better Than Names?
To avoid confusion, it is easier to refer to a cigar’s length and width when describing its size. The length is measured in inches, while the width is measured by ring gauge—the diameter expressed in 64ths of an inch.
Despite all the inconsistencies with cigar names, it is still more interesting (and colorful) to describe the different sizes and shapes of cigars with names rather than with numbers. This is all part of the cigar mystique.
Names for Cigar Shapes
You may never have to use the terms that refer to the shape of a cigar since most of the common names for cigars are usually associated with their size. But if you want to truly be part of the cigar culture, it’s interesting to understand what these terms refer to:
Parejo: A parejo cigar is any cigar that has perfectly straight sides with a cylindrical shape, topped by a rounded head.
Figurado: A cigar with an irregular shape (e.g. having a cone-shaped head) is called a figurado.
Belicoso: This is a figurado-shaped cigar that tapers sharply at the head. The ter refers to any cigar that tapers at the head.
Torpedo: This is a cigar with a tapered head that comes to a very sharp point. Some manufacturers use other names for this shape.
Pyramid: Similar to Torpedo, but this cigar tapers all along its length, not just near the end.
Culebra: This unusual cigar features three individual cigars size braided together in a pretzel shape. Culebra means “snake” in Spanish. You are of course expected to separate the cigars before smoking them.
Perfecto: A cigar that is tapered on both ends.
Salomón: A Salomón is a very large Perfecto-shaped cigar with a tapered end that is usually cut flush. Longer versions with a closed foot are often known as a Diadema.
Diadema: This is a perfecto-shaped cigar similar to a Salomón, but slightly longer and thinner
Common Names for Cigar Sizes
There are many names for the various sizes (and shapes) of cigars, but here are just a few of the more common terms that you may encounter, and the approximate range of their dimensions. The ranges listed can be even wider, despite any overlapping.
Name Length (in.) Ring Gauge
Corona 5.5 to 6" 42 to 45
Panatela 5.5 to 6.5 34 to 38
Lonsdale 6 to 6.5 42 to 44
Lancero 7 to 7.5 38 to 40
Churchill 6.5 to 7 46 to 48
Robusto 4.5 to 5 48 to 50
Toro 6 to 6.5 48 to 50
Presidente 7 to 8.5 52 to 60
Gigante
6 60
Torpedo(Cone Shaped Head) 5 ½ to 6 ½ 46 to 52
How Is RC Engine Size Measured?
The 14 Types of Female Models
What Are Glulam Timbers and How They Are Used?
The Different Kinds of Male Models
Glossary of Modeling Terms and Phrases
Air Force Enlisted Rank (Insignia) History
Learn About Tour Merchandise Deals
The 12 Best Men’s Dress Shirts of 2022
Barcode Scanner Buying Guide for Retailers
Comparing Different Types and Sizes of Pianos
What Is the Difference Between Laptop and Notebook Computers?
How eBay Sellers Can Prevent Returns
The 9 Best Men’s Dress Pants of 2021
18 Tools Every Concrete Contractor Must Have
What is a Regulation-Sized Pool Table?
What to Consider When Buying Bike Tires
How Is RC Engine Size Measured?
How Is RC Engine Size Measured?
The 14 Types of Female Models
The 14 Types of Female Models
What Are Glulam Timbers and How They Are Used?
What Are Glulam Timbers and How They Are Used?
The Different Kinds of Male Models
The Different Kinds of Male Models
Glossary of Modeling Terms and Phrases
Glossary of Modeling Terms and Phrases
Air Force Enlisted Rank (Insignia) History
Air Force Enlisted Rank (Insignia) History
Learn About Tour Merchandise Deals
Learn About Tour Merchandise Deals
The 12 Best Men’s Dress Shirts of 2022
The 12 Best Men’s Dress Shirts of 2022
Barcode Scanner Buying Guide for Retailers
Barcode Scanner Buying Guide for Retailers
Comparing Different Types and Sizes of Pianos
Comparing Different Types and Sizes of Pianos
What Is the Difference Between Laptop and Notebook Computers?
What Is the Difference Between Laptop and Notebook Computers?
How eBay Sellers Can Prevent Returns
How eBay Sellers Can Prevent Returns
The 9 Best Men’s Dress Pants of 2021
The 9 Best Men’s Dress Pants of 2021
18 Tools Every Concrete Contractor Must Have
18 Tools Every Concrete Contractor Must Have
What is a Regulation-Sized Pool Table?
What is a Regulation-Sized Pool Table?
What to Consider When Buying Bike Tires
What to Consider When Buying Bike Tires
Home
Entertainment
Careers
Activities
Humor
About Us Advertise Careers Privacy Policy Editorial Guidelines Contact Terms of Use EU Privacy
LiveAbout is part of the Dotdash Meredith publishing family.
Home
Home
Entertainment
Careers
Activities
Humor
About Us Advertise Careers Privacy Policy Editorial Guidelines Contact Terms of Use EU Privacy
About Us
Advertise
Careers
Privacy Policy
Editorial Guidelines
Contact
Terms of Use
EU Privacy
Entertainment
Careers
Activities
Humor
LiveAbout is part of the Dotdash Meredith publishing family.
When you visit the site, Dotdash Meredith and its partners may store or retrieve information on your browser, mostly in the form of cookies. Cookies collect information about your preferences and your devices and are used to make the site work as you expect it to, to understand how you interact with the site, and to show advertisements that are targeted to your interests. You can find out more about our use, change your default settings, and withdraw your consent at any time with effect for the future by visiting Cookies Settings, which can also be found in the footer of the site. Cookies Settings Reject All Accept Cookies
